Skid-mounted Cleaning Module
1)、After separated from garbage,the crude oil and soil is put into cleaning module level 1。 Covered by Aacket filled with polyurethane foam insulation layer,this level is a horizontal strong stirring tank consisting of Including tops flotation Filters,built-in stirring wing, skimmers,grating,liquid level controller,automatic temperature controller,stainless steel radiators,etc。(steam heating or oil heating)。
2)、Level 1 put oil into the oil collector,and then the oil flow into oil tank。
3)、Due to restrictions of sample tests and mobile working water and so on,level 2 and level 3 is appended based on fixed mode。
4)、Level 2 and level 3 is Vertical devices and has similar architecture to level 1。After processing by level 2 and level 3,oil is put back level 1,and collected by oil tank。
5)、If still not cleaned,oil is re-circulating cleaned through put back into level 1 by making valve 1 close and valve 2 open。
6)、Dosing device is composed of a tank and metering pump With an electric heating rod in the bottom,tank has stirring function。In winter,the tank can be heated。The Metering pump is composed by a diaphragm pump and inverter。The inverter adjusts the speed of diaphragm pump,so reagent metering is controlled。
7)、Total power:25kw。
Skid-mounted Cleaning Module 本文被阅读 1080 次